# Pasting code into Fibery is awkward

**URL:** <https://community.fibery.io/t/pasting-code-into-fibery-is-awkward/10731>\
**Category:** Bugs & Issues\
**Created:** [April 10, 2026, 6:35pm UTC](https://community.fibery.io/t/pasting-code-into-fibery-is-awkward/10731 "2026-04-10T18:35:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cadsharp](https://sea2.discourse-cdn.com/flex020/user_avatar/community.fibery.io/cadsharp/32/14008_2.png) [@cadsharp](https://community.fibery.io/u/cadsharp)\
**Post date:** [April 10, 2026, 6:35pm UTC](https://community.fibery.io/t/pasting-code-into-fibery-is-awkward/10731/1 "2026-04-10T18:35:59Z")

</div>

In order to successfully paste code from ChatGPT into Fibery, I have to do the following:

1. Write arbitrary text in the Fibery document
2. Select said text
3. Change text style to code
4. Double-click the arbitrary text
5. Ctrl+V to replace said said text

This is five steps, versus simply pasting the code directly into the Fibery doc, which results in any of all of the following:

- Portions of the code not being included in the code block
- Portions of the code not being properly indented or formatted

This requires cleanup work that far exceeds the effort of the aforementioned 5-step process.

---

<div class="post-metadata">

**Author:** ![Chr1sG](https://sea2.discourse-cdn.com/flex020/user_avatar/community.fibery.io/chr1sg/32/3941_2.png) [@Chr1sG](https://community.fibery.io/u/Chr1sG)\
**Post date:** [April 10, 2026, 7:39pm UTC](https://community.fibery.io/t/pasting-code-into-fibery-is-awkward/10731/2 "2026-04-10T19:39:55Z")

</div>

Can’t you just create an empty code block (start typing `/co..` or press `Ctrl` `Alt` `5`) and then paste the code?

---

<div class="post-metadata">

**Author:** ![cadsharp](https://sea2.discourse-cdn.com/flex020/user_avatar/community.fibery.io/cadsharp/32/14008_2.png) [@cadsharp](https://community.fibery.io/u/cadsharp)\
**Post date:** [April 13, 2026, 9:50pm UTC](https://community.fibery.io/t/pasting-code-into-fibery-is-awkward/10731/3 "2026-04-13T21:50:21Z")

</div>

I can. That is faster than what I suggested above – so thanks for that. But the underlying issue remains – pasting code into Fibery is awkward / buggy.