# My Filters =\> Select a specific filter

**URL:** <https://community.fibery.io/t/my-filters-select-a-specific-filter/4390>\
**Category:** Ideas & Features\
**Tags:** filter\
**Created:** [May 1, 2023, 1:38pm UTC](https://community.fibery.io/t/my-filters-select-a-specific-filter/4390 "2023-05-01T13:38:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![NicolSpies](https://sea2.discourse-cdn.com/flex020/user_avatar/community.fibery.io/nicolspies/32/4317_2.png) [@NicolSpies](https://community.fibery.io/u/NicolSpies)\
**Post date:** [May 1, 2023, 1:38pm UTC](https://community.fibery.io/t/my-filters-select-a-specific-filter/4390/1 "2023-05-01T13:38:37Z")

</div>

I am increasingly using Filter Rules and Groups to create different filters in Table Views. The problem is I keep on removing filters to create different filters. Later I recreate the same filters I removed, again.

It will be great if the created filters can be active or inactive in order to apply only the active filters to the view. This will save a lot of time so that previously used filters do not have to be recreated every time.

The filters could have a checkbox to select which ones should be applied as shown in the following mock-up:

 ![snap433a](https://us1.discourse-cdn.com/flex020/uploads/fibery/original/2X/4/477bd5a34c9308bc019aa6f3998ba5a095376dba.png)

---

<div class="post-metadata">

**Author:** ![Zvonimir\_Maranic](https://sea2.discourse-cdn.com/flex020/user_avatar/community.fibery.io/zvonimir_maranic/32/7175_2.png) [@Zvonimir\_Maranic](https://community.fibery.io/u/Zvonimir_Maranic)\
**Post date:** [July 25, 2023, 12:55am UTC](https://community.fibery.io/t/my-filters-select-a-specific-filter/4390/2 "2023-07-25T00:55:20Z")

</div>

Please Fibery team. We need this.

Zvonimir Maranic on behalf of Neara.

---

<div class="post-metadata">

**Author:** ![anadin](https://sea2.discourse-cdn.com/flex020/user_avatar/community.fibery.io/anadin/32/5376_2.png) [@anadin](https://community.fibery.io/u/anadin)\
**Post date:** [August 18, 2023, 5:34am UTC](https://community.fibery.io/t/my-filters-select-a-specific-filter/4390/3 "2023-08-18T05:34:05Z")

</div>

Very much +1 I have to keep making and removing filters to turn them on and off temporarily, I’d also love to be able to have a Filter in the header and not have to go into this filter menu to modify them/use them