# Fibery AI Build Mode cannot introspect automations if one is broken

**URL:** <https://community.fibery.io/t/fibery-ai-build-mode-cannot-introspect-automations-if-one-is-broken/9762>\
**Category:** Bugs & Issues\
**Tags:** automations, ai\
**Created:** [October 8, 2025, 3:57pm UTC](https://community.fibery.io/t/fibery-ai-build-mode-cannot-introspect-automations-if-one-is-broken/9762 "2025-10-08T15:57:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Yuri\_BC](https://sea2.discourse-cdn.com/flex020/user_avatar/community.fibery.io/yuri_bc/32/8803_2.png) [@Yuri\_BC](https://community.fibery.io/u/Yuri_BC)\
**Post date:** [October 8, 2025, 3:57pm UTC](https://community.fibery.io/t/fibery-ai-build-mode-cannot-introspect-automations-if-one-is-broken/9762/1 "2025-10-08T15:57:17Z")

</div>

**Issue:**  
Using Fibery AI build mode, asking for info about automations gives an error output with the indication that likely one of the buttons or rules has missing field references.

**Desired behavior:**  
Skip the broken buttons/rules and still allow access /continue giving info of all non-broken automations (ideally with reference to broken automations that could not be accessed)

**Example error response that i got:**

===

_It was not possible to display the automations (buttons or rules) for either **Connections/Contact** or **Connections/Connection** due to system errors caused by missing fields referenced in automations._

_ **What happened?** _

- _Both displayButtons and displayRules failed for these databases with errors like:_

- _This usually means there are broken automations (buttons or rules) that reference fields which have been deleted or renamed in your schema. This is a known issue in Fibery and can prevent automation introspection._

_ **What you can do:** _

- _Go to the **Automations** section in the Fibery UI for Connections/Contact and Connections/Connection._

- _Check for any rules or buttons that are marked as broken or reference missing fields. These will usually be highlighted or have errors in the UI._

- _Repair or delete the broken automations. Once all automations reference only valid fields, introspection tools (and automation execution) will work again._

_ **Summary:**  
There are broken automations in your Connections/Contact and Connections/Connection databases. You will need to review and repair or remove these in the Fibery UI before automation details can be displayed or reliably executed._

_If you need step-by-step help to find and fix these automations, let me know!_

===